Make a saving on the ultimate baby feeding bundle including our RapidCool kit and UV Steriliser. You’ll have all the tools you need to make a formula feed in just 2 minutes* and sterilise your little one’s bottles at the power of light – UV light, that’s just 3 minutes! That’s magic.
RapidCool is the most innovative way to make a formula feed to the perfect temperature, in just 2 minutes* and - following NHS guidelines too! As it's truly portable, making a feed on the go, has never been easier. Our RapidCool Kit comes with 2 RapidCool's and 1 insulated flask, so you can take your boiling water with you ready to make up the feed. Simply add water from the insulated flask and your pre-measured formula to the RapidCool and mix well, turning it upside down for at least 5 seconds.
Our UV Steriliser uses ultraviolet light to sterilise practically anything, in just 3 minutes! No water, no chemicals, no cooling or drying time - it's so simple. Just add your little one's bottles, toys and teethers, zip up the steriliser and press the button on the front to start the cycle.
Bundle Includes; 2 RapidCools and 2 Digital Lids, 1 Insulated Flask, 1 Standard Lid, 2 Milk Powder Dispensers and 1 UV Steriliser with metal tray.
Not Suitable for latex products.
Cleaning Wipe clean only and leave open to dry. Do not soak or submerge in liquid. Do not use bleach or harsh cleaning agents.
WARNING! Please read and retain these important instructions for future reference. . Please only use the power supply provided to power the device. Attempting to use an alternate power supply may damage the device permanently or stop it from working as described.
Do not stare directly at UV light as it can cause discomfort or retinal damage with prolonged exposure.
Yes this product is BPA free.
The digital lid should be cleaned in warm, soapy water. After cleaning, the lid should be sterilised by UV sterilisation or cold-water sterilisation. The RapidCool™ lid must glow Nuby red when attached to the flask to indicate the water is at the correct temperature. Keep the flask upside down to make sure the water is in contact with the lid for at least 30 seconds, then the lid will be safe to use!
You can do this via UV sterilisation, cold water sterilisation, steam sterilisation or in a dishwasher. Never steam sterilise in a microwave.
No, you don’t have to wait! The freshly boiled water can and should be used immediately for the safest feed. The NHS guidelines state that the water should be no less than 70°C, but this does not mean that you must wait for it to reach this temperature first before mixing with formula. Mixing formula with freshly boiled water is the safest way to feed, as it ensures any harmful bacteria are eliminated!
The RapidCool™ works by absorbing heat from hot liquids. After being exposed to heat, it will require a minimum of 3 hours before being ready to use again. The flask should feel cool to the touch.
The NHS guidelines state that when preparing a bottle, you should use freshly boiled water, which has been left no longer than 30 minutes so that it remains at a temperature of at least 70°C.
With RapidCool™, you pour freshly boiled water into the base along with your formula, but thanks to its patented technology the bottle cools the feed in 2 minutes*.
Using freshly boiled water means that any harmful bacteria is killed and the RapidCool™ eliminates the need to run bottles under cold water or use an ice bath to get the feed to the right temperature.
The RapidCool™ is quiet and quick, so you are not staying up longer than necessary, and no noisy machines or plugs are needed. There is also the option of keeping hot water to hand in an insulated flask, to save time boiling the kettle in the middle of the night!
The insulated flask will keep water above a safe temperature to make a feed for at least two hours, when pre-heated with boiling water first. The insulated flask works with the digital lid to show you with a red ‘Nuby’ that the water is still hot enough to kill any bacteria in your little one’s formula.
Orders are processed between Monday and Friday. Please allow 4 to 8 working days for delivery. Deliveries will be made by EVRi and costs are at a flat rate.
Orders of £30 and over – FREE (UK Mainland)
UK Mainland (Excluding Scottish Highlands) - £5.50
Scottish Highlands - £8.99
Scottish Islands - £11.99
Isle of Wight & Isle of Man - £8.99
Northern Ireland - £8.99
Once your order has been processed you will receive an email notification with your tracking number. Please login using your tracking details and update your delivery preferences.
Orders over £30 will be sent via a signed for service. This means you have peace of mind that your order will arrive safely. Your courier will attempt to deliver to your address three times.
Not going to be in? You can also change your delivery preferences to collect from your local parcel shop or select your preferred neighbour.
If you have further questions regarding delivery, please call our customer careline on freephone 0800 334 5844.
*Due to high demand over the festive period, Evri are experiencing delays out of our control. We advise you allow additional time for your order to arrive.
For all return queries, please speak to our customer service team for assistance first, we’re happy to help! Our email address is email@example.com or if you prefer you can use our website contact form.
For more information click here
*Please allow 14 days from the date you place your order before contacting our Customer Service department.